Welcome to Jiangsu Shengman Drying Equipment Engineering Co., Ltd.

Set Homepage Favorites Contact

SELECTION

▶ Drying equipment selection

▶ Grinding equipment selection

▶ Mixing equipment selection

▶ Selection of granulation equipment

CONTACT

4008812289

+86-519-81083912

sales@smdryer.com

2853280978@qq.com

Changzhou Zhenglu town industrial area

 

SELECTION

Annual production capacity exceeding 100 million yuan

 
Drying equipment selection
1. Material name: Molecular formula: PH value:

2.Dry material form:
Powder
Powder
Particles
Block
Flake
Slurry
Filter
Paste
Paste
Solution
Fibrous
Emulsion
Suspension

3. Other features of the material: Flammability Explosive Agglomeration Smell  other:

4.Name of the media to be evaporated: Molecular formula: PH value:
   The boiling point of the evaporated medium: ℃ ;Do you need recycling? Yes 、No

5. Initial moisture content of the material: % ;Which contains crystal water:
   Require moisture after drying: % ;Requires surplus crystal water:

6. Material Initial temperature: ℃ ;Requirements After drying temperature: ℃。Whether to use the cooling receipt: Yes 、No

7.The maximum temperature at which the material is dry: ℃;When the material is dry, the optimum temperature range:

8.Material softening temperature: ℃;Material melting point:

9.The specific heat of the material: KJ/kg. ℃;Material thermal conductivity: KJ/m2.h. ℃

10.The true density of the material: kg/m3,Material bulk density: kg/m3

11.Material particle size distribution range: mm (mesh) to mm (mesh);Proportional content ≥ %   
Where: maximum granularity mm (mesh);Proportional content ≥ %
Minimum size: mm (mesh);Proportional content ≥ %

12.The requirements of the finished product after drying requirements: mm (mesh)

13.Viscosity in the raw material of the material: Centipoise (cp); heating whether the mouth to reduce viscosity : Yes 、No

14.Dry material can damage the form : Yes No

15.Product output after drying: kg/h (Or wet material handling capacity: kg/h)

16.Drying requirements: Continuous drying, Gap dry, Dynamic drying, Static dry, 
    Hot air drying, Vacuum drying, Microwave drying, others:

17.Material Drying methods of the past Drying methods or similar products:
Want to use the dryer Model:

18.Wind requirements: Natural folk songs, 30 million filter, 10 million filter, 1 million filter, other:

19.User requirements for drying equipment: Material contact with stainless steel, All stainless steel, Titanium,
  Aluminum alloy, Carbon steel, Glasses , Tetrafluoroethane, others:

20.Intended to use stainless steel Model: SUS304 , SUS321 , SUS316 , SUS316L, SUS2235 ,
 other:

21.Material recovery requirements: ≥ %;Dust environmental protection requirements: ≤ mg/nm3 ;
 Exhaust environmental protection requirements: ≤ mg/nm3;Waste water, waste maximum allowable emission requirements ≤ mg/L

22.Drying process used in the heat medium and heat source: hot water ℃ ; steam Mpa; Heat transfer oil ℃; 
 Electric heating , Coal-fired hot air stove , Fuel hot air stove , Gas hot air stove ,other:

23.Heat medium and heat source: own , Another purchase , Supporting procurement ,other:

24.Equipment cleaning and hygiene requirements:

25.Equipment used: ,altitude: ,humidity: , Maximum temperature:
  lowest temperature: , Average annual temperature: ,other:

26.Budget investment for optional equipment (RMB): Million yuan

27.other requirements:
code:

 
 

24 hours free calls:

4008-812-289

General Manager's Office: +86-519-81235888

Contact: Ms. Lu

Sales Engineering Department: +86-13358165818

Fax: +86-519-81083912

Address: Zhenglu Town, Changzhou City Industrial Zone

E-mail:sales@smdryer.com

E-mail:2853280978@qq.com

Website:www.jssmdrying.com

E-mail

LINKS

Home | About us | News | Products | Cases | Selection | Jobs | Contact | 中文版

Copyright(C)2017, Jiangsu Shengman Drying Equipment Engineering Co., Ltd. All Rights Reserved. Supported by Toocle Copyright Notice