Welcome to Jiangsu Shengman Drying Equipment Engineering Co., Ltd.

Set Homepage Favorites Contact

PRODUCTS

▶ Regular Drying equipment

▶ Advantages engineering

▶ Granulating coating equipment

▶ Mixing & crushing equipment

▶ Heating & dust removal

▶ Other equipment

CONTACT

4008812289

+86-519-81083912

sales@smdryer.com

2853280978@qq.com

Changzhou Zhenglu town industrial area

 

PRODUCTS

Annual production capacity exceeding 100 million yuan

HG series (single-drum , two-drum ) Rolling scratch board drier

Overview Description

Roller scraper dryer is an internal heating conduction type continuous drying equipment. Rotating the drum through its lower trough, adhere to a thickness of the film, the heat through the pipeline to the drum wall, conduction to the outer wall of the drum, and then conduction to the film, so that the humidity in the film to be evaporated, The moisture-containing material is dried. The dried material is driven by a scraper mounted on the surface of the drum to the screw conveyor placed under the scraper, and the dry material is concentrated and packaged by a screw conveyor.

 

Application

HG series of drum scraper dryer is widely used in food, chemical, pharmaceutical and other industries sticky, paste paste material production, drying and other processes.

 

Features

● High thermal efficiency. Due to the drum dryer heat transfer mechanism is heat conduction, heat transfer direction in the entire operation cycle to maintain the same, in addition to cover heat and heat radiation loss, the rest of the heat all for the evaporation of the film moisture, the thermal efficiency of up to 80% -90%.

● flexible operation, wide applicability. Adjust the drum dryer a lot of drying factors. Such as the concentration of the feed, the thickness of the coating film, the temperature of the heating medium, the rotational speed of the drum, etc., can change the drying efficiency of the drum dryer, and many factors are not implicated. This gives the drum drying operation a great deal of convenience, so that it can adapt to a variety of materials, dry and different production requirements.

● Drying time is short. The drying cycle of the material is generally only 10-300 seconds, suitable for heat-sensitive materials. If the drum dryer is set in the vacuum, it can be operated under reduced pressure.

● Drying rate is large. As the coating material applied to the wall of the film is very thin, generally 0.3-1.5mm, and heat transfer, mass transfer direction, the film surface can maintain 20-70kg · H2O / m2 · h evaporation.

24 hours free calls:

4008-812-289

General Manager's Office: +86-519-81235888

Contact: Ms. Lu

Sales Engineering Department: +86-13358165818

Fax: +86-519-81083912

Address: Zhenglu Town, Changzhou City Industrial Zone

E-mail:sales@smdryer.com

E-mail:2853280978@qq.com

Website:www.jssmdrying.com

E-mail

LINKS

Home | About us | News | Products | Cases | Selection | Jobs | Contact | 中文版

Copyright(C)2017, Jiangsu Shengman Drying Equipment Engineering Co., Ltd. All Rights Reserved. Supported by Toocle Copyright Notice